WELLTECH NEWSLETTER VOL.31 - ePBX-100 NEW FUNCTION RELEASED


<Vol. 31> January 26, 2007	http://www.welltech.com

New Function
Proxy port is configurable. This optional parameter allows user to control the port on which user wish the ePBX-100 to accept SIP connections. Default is 5060. RTP port is configurable. The voice media will use RTP as the transport protocol. User can define the RTP port range that ePBX-100 opened. Default start port is 10000 and end port is 20000. Add CDR function CDR Mode: Select the mode for CDR. User can disable the CDR or send the CDR record to a certain CDR server. User can also store the CDR records within ePBX-100. Disable: Select this one to Disable CDR function. RealTime: User can install a CDR program to collect and store CDR records. The CDR program is Welltech proprietary. Storage: If user do not prepare a PC as a CDR server. User can also define the CDR Mode to Storage. ePBX-100 will store the CDR records within itself. Add “Hot-Key Transfer” Function for Extensions and outbound call. Enable this feature will permits the calling party or called party to transfer a call by pressing the 0 (For Blind Transfer) or 9 (For consultant Transfer) key. Default is disabled. Music Ring Back Tone can be enabled or disabled. Enable this function will provide music to the calling party till the call is answered Add [Scheduled Greeting] function let user define the greeting based on business time. Add [Fixed Greeting] function to enforce the company announcement as a fixed greeting. Add below items to solve the problems when ePBX-100 is behind NAT. Behind NAT: Enable or Disable [Behind NAT] function. External IP: If user input External IP, ePBX-100 will take that IP address as its argument. If ePBX-100 is behind NAT, the SIP header will normally use the private IP address assigned to the server. The remote device will not know how to route back to this address; thus, it must be replaced with a valid, routable address. Extern Host: External Host takes a fully qualified domain name as its argument. If ePBX-100 is behind NAT, the SIP header will normally use the private IP address assigned to the server. If user set this option, ePBX-100 will perform periodic DNS lookups on the hostname and replace the private IP address with the IP address returned from the DNS lookup. Local Net: Local Net is used to tell ePBX-100 which IP addresses are considered local. If one of caller or callee is not under Local Net, ePBX-100 will set the address in the SIP header that can be translated to that specified by External IP or the IP address can be looked up with External Host. The format will be IP/ Subnet Mask. Example: 192.168.1.0/ 255.255.255.0 Add [Group Pick UP] Function let user define pick up group for extension. Add [Call Restriction] Function let user define dial level for Extension and Trunk. User can choose 5 dial level for Extension, including [ext-only], [ext+R1], [ext+R12], [ext+R123], [ext+allroutes]. User can define an “Outgoing call” record, to a certain Route Level, as R1, R2… etc. [ext-only] means this subscriber can only call to Extension. [ext+R1] means the subscriber with such DialPlan can call to Extension and Route Level with R1. [ext+R12] means the subscriber with such DialPlan can call to Extension and Route Level with R1 and R2. [ext+R123] means the subscriber with such DialPlan can call to Extension and Route Level with R1, R2 and R3. [ext+allroutes] means the subscriber with such DialPlan can call to Extension and Route Level with R1, R2, R3 and R4. Add [Dial Group] Function. Add [Speed Dial] Function. Http port is configurable. User can change the Http port, and default is 10087. Add [PPPoE] Function. Add [SMTP] Function. ePBX-100 can support Voice Mail to e-mail. Before activate this feature, user should give the ePBX-100 an e-mail account and set the SMTP for ePBX-100, so that the ePBX-100 has the ability to send the leaved message to the subscriber's mail box. Ring Time is configurable. Ext Ring Time: This field defines the timeout value if the call is between Extension and Extension. Default is 20 seconds. Out Ring Time: This field defines the timeout value if the call is from Extension to outside (define by routing table). Default is no limitation. User can update a certain sound file by importing a new one. Add [Flash Clean] Function. This function will clean all configurations of ePBX-100 and reset to factory default value, including Network setting and Web login account. After Flash Clean, ePBX-100 will auto reboot. Implement Reset button for ePBX-100. User can reset the ePBX-100 to factory default value by pressing reset button for 5 seconds. Only the hardware version 0.6 or above can support such function.

Introduction The Welltech ePBX-100/100A is the next generation IP PBX system for small enterprise. It is also designed to operate on a variety of VoIP applications, such as auto-attendant, voice conference, call transfer, call pick up and IP-based communications. With the tiny box, small to medium enterprise or homes can use it to access the Internet and to make VoIP phone calls. Customers can select different suite and optional products to meet their request. To Integrate with WellGate 3804A can provide PSTN access function, IP Phone 388 and WellGate 3504A can provide extensions. With flexible and full functionality, Welltech ePBX-100/100A give a complete transition from traditional PABX to the new generation IP-PBX. More info...

Application Diagram


Specifications
Protocol SIP (Session Initiation Protocol) Call Features Authentication Automated Attendant Call Transfer (LP-388, WG3504A) Blind Transfer (LP-388, WG3504A) Call Forward on Busy (LP-388, WG3504A) Call Forward on No Answer (LP-388, WG3504A) Call Forward Unconditional (LP-388, WG3504A) Call Hold/Retrieval (LP-388, WG3504A) Call Routing Call Waiting (LP-388, WG3504A) Caller ID (LP-388, WG3504A) Do Not Disturb (LP-388) Flexible Extension Logic Music On Hold Music On Transfer Call Pickup Three-way Conference (LP-388) Time and Date Trunking (WG3804A) VoIP Gateways (3804A) Voice Mail to e-mail Call Detail Recor Technical Features Subscriber NAT transversal Phone set record Greeting Management: Web Browser Management HTTP upgrade firmware and ring back tone file Export/Import configuration Network Interface: 1WAN 1LAN DTMF: In-band, RFC2833, SIP-Info Network: Support Fixed IP and DHCP mode Build-in 1G storage (ePBX-100A) Capacity 100 Register 13 concurrent call Dimension 17.5 x 12.5 x 3.2 cm

It is strongly suggested to purchase fully compatible products as below :
Welltech IP Phone: LP-388 Welltech FXS Gateway: WellGate 3502A/3504A Welltech FXO Gateway: WellGate 3802A/3804A

INQUIRE NOW!
Welltech Computer Co., Ltd. TEL : +886-2-82265699 FAX : +886-2-82265799 http://www.welltech.com