LP900A Water-Resistant IP Phone
IP65 Water-Resistant Certificated


  • IP65 Water-Resistant Certificated
  • Wall mounted
  • Hold Handset in its position in wobbling place
  • Moisture and Corrosion resistance
  • Suit to install at Vehicle, Vessel/Ship, Gas/Oil Station, Mine Shaft
  • Material of Enclosure: SMC (Sheet Molding Compound)
  • Rugged enclosure without incurring ESD
  • Dial Keypad made of SUS 304 Stainless steel (Corrosion Free)
  • Transfer call, Hold call and adjust received volume
  • 160 records of Phone Book Dialing



LP900A is a SIP IP phone with PoE (Power on Ethernet) which works on both
IPv6 and IPv4 IP network address simultaneously.
It supports up-to two SIP Server/IP-PBX to register. Each account can be
configured to access IPv4 or IPv6 network SIP Server freely.
It makes migration from IPv4 to IPv6 network smoothly.

IPv6 SIP IP Phone is ready to Market

IPv6 address was developed for years, however, it was not practical to our life up to date.
More and more electronic devices are able to link to IP Network, this makes existing IPv4 address
supply in shortage to global market. Meanwhile, the emerging countries are not able to increase
IPv4 address supply due to strong market demand on broadband services.
LP900A is an SIP based IP Phone which built-in both IPv6 and IPv4 IP address.
No matter when you are ready to deploy IPv6 network,
or reserve the future expansion to IPv6 from existing IPv4 address, LP900A is ready to go.
Both IPv6 and IPv4 address are working simultaneously at Voice IP Call.
Its flexibility of both IPv6 and IPv4 accept and interwork both addresses on today and tomorrow
when you need.

To select freely up to 2 SIP service Accounts

LP900A is appropriate to use for VoIP Service Providers, IP Centrex service and IP-PBX within
offices and remote branch offices.
Up to 2 SIP Servers (or ITSP Service provider or alternative IP-PBX) can be configured simultaneously
no matter where they are seated at IPv6 or IPv4 network address.

Rich Telephony Features

LP900A is compatible with Name Brand IPv4 and IPv6 SIP server or IP-PBX server with a variety of
telephony features which are similar to legend digital PBX features and operational behaviors.
It provides flexible talking facility to switch among them such as Transfer call, Hold call and adjust
received volume during a call.

Management IP Phone is easier than before

LP900A supports HTTP provision feature via MAC address. An unique MAC address profile at each
IP phone was configured before installation.
Those MAC addresses profile were created at HTTP server. It allows system manager to change
each IP Phone configuration and firmware upgrade remotely.
Its Web page support built-in Log Messages to show current connection status with the other end
or register to SIP Server or IP-PBX or call to other end fail reasons without installation externa
l Log Messages capture program.


  • Interface:
    • Ethernet port (RJ-45, 10/100Base-T)
      • 1-WAN port connect to Ethernet PoE Switch
      • PoE (IEEE 802.3af ) at Ethernet port
    • Handset
    • Dial Pad
  • Mechanical Enclosure Specification
    • Handset fixture to hold in its position when wobbling
    • Enclosure use Rugged materials, good airtightness
    • Surface doesn't incur ESD, anti-explosion
    • Vibrate/Shake resistance: Drop Free design Hook mechanism
    • Suitable to install at Vehicle, Vessel/Ship, Gas/Oil station, mine shaft
      • Draft and strong wind place
    • Dial Pad: Made of SUS 304 Stainless steel
      • Wear Resistant, Corrosion Resistant, Anti-Aging, Vandalize
    • Handset: Good airtightness design, Non break after continuoushitting, fire resistance
    • Handset Cord: Military standard, preventing an acid and alkaline, not catch on file, anti-aging
    • Magnetic Hook Switch, airtightness design
  • IP Network connection
    • DHCP, PPPoE and Static IP
    • Dynamic DNS (DDNS)
    • VLAN on both WAN and LAN
    • VID (802.1Q/TAG): 3 to 4094
    • User Priority (802.1P): 0 to 7
    • Voice QoS Support
    • SIP QoS Support
    • DNS Client
    • VPN: VPN and L2TP
    • NTP Time Setting with Daylight Saving time
    • IPv4 (RFC 791), IPV6(RFC 2460)
    • IPv4 (RFC 791), IPV6(RFC 2460)
    • Automatic IPAddress, IPv6 in IPv4 Tunnel
  • SIP Protocol :
    • RFC3261 compliance
    • Support up-to two SIP Register Accounts (IPv4 and IPv6 are selectable)
    • Configure SIP port and RTP port
    • SIP UDP Protocol
    • Support SIP compact Form
    • SIP Session Timer (RFC 4028)
    • MD5 Digest Authentication
    • Reliability of provisional responses PRACK (RFC3262)
    • Early/Delay media support
    • Offer/answer (RFC3264)
    • Message Waiting Indication (RFC3842)
    • Event Notification (RFC3265)
    • REFER (RFC3515)
    • Support DNS SRV to locate SIP Server (RFC 3263)
    • Support STUN NAT Traversal
    • Support "rport" parameter (RFC 3581)
    • Configure user agent content
    • Send Flash Event: DTMF, SIP INFO, SIP INFO(digit)
    • Configure Encryption Type and key
  • Audio Codec :
    • G.711 A-law/μ-law, G.729
    • G.711 A-law/μ-law, G.729
    • Silence Suppression
    • VAD/CNG
    • Automatic Gain Control
    • DTMF: In-band, Out of Band, RFC2833, SIP INFO
    • Adaptive/Configurable Jitter Buffer up to 96 packets
    • Acoustic Echo Cancellation
    • Volume Adjustment (Receiver)
    • Customized Idle Text
    • Daylight Saving
    • Dialing Plan
    • Digit Manipulation
    • Selectable Call Progress Tone
    • Auto Answer Mode
    • Support Auto Priority (Auto Switch) Calling
    • Support Specified Line Calling
  • Call Features :
    • Speed Dialing
      Phone Book x 160 records
    • Flexible Dial Plan Setting – Drop Prefix and Replace Rule
    • Call Forward (Busy, Unconditional, No Answer)
    • Hotline function
    • Alarm Time Setting
    • Auto Answer set up
    • Ring Timeout
    • Call Hold
    • Call Transfer
    • Configure Tone: Dial Tone, Ring back Tone, Busy Tone, Congestion Tone
      , Ring Tone and Call Waiting Tone.
    • Music-on-hold support (via IPPBX or local)
    • Support Peer to Peer Dialing
    • Reject Anonymous call
    • Multilanguage Web User Interface
    • Administrative Telnet CLI Login
    • 3 Levels of User Access Right with Password protection
    • Provides System Status
    • Diagnostics via syslog with different log type
    • Configuration Backup/Restore
    • Reset to Default
    • Auto Provision via TFTP, HTTP and FTP with Schedule
    • Auto update firmware via TFTP, HTTP and FTP with Schedule
    • Disable WAN port management
    • Configure WEB Login port (default is 9999)
  • Environmental :
    • Physical Dimension: 29 × 18.5 × 11.8 cm (Wall-mount)
    • Net Weight: 3.9kg
    • Gross Weight: 4.8 kgms
    • Single pack dimension: 36 x 15 x 21.5 cm
    • Operating Temp. & Humidity
      • Temp.: 0°C~45°C (32°F~113°F)
      • Humidity: 10%~90% relative humidity, non-condensing
    • Power Consumption of PoE : 5.5Watts
  • Approvals:
    • IP65, CE, FCC, LVD and RoHS
  • Country of origin:
    • Made in Taiwan
  • Packing Accessories
    • LP900A Water-Resistant IP Phone x 1 pcs
    • Handset x 1 pcs
    • Wall Mount bracket x 2 pcs
    • Cable tie x 1 pcs
  • Warranty
    • One year



Copyright © 2016. WELLTECH TECHNOLOGY CO., LTD. All Rights Reserved.