Welltech
Product Release Note
|
Date:
20100324 |
|||||
|
Division: |
SDD1 |
Releaser: |
Irene
Ko |
||
|
Model
Name: |
LP600O/LP600N/LP389 |
Object: |
S/W |
||
|
Subject: |
V |
||||
|
Release
contents |
|||||
|
Bug
Fixed |
|||||
|
1.
When
LP-389/LP-600 is doing a call transfer and receive a 404 response, LP-389/LP-600
didn’t play busy tone but silence. It was fixed. 2.
When
receive a SIP INFO message for DTMF relay, LP389/LP600 doesn’t play the
correct DTMF tone. It was fixed. |
|||||
|
Feature
and Function Added |
|||||
|
1.
Support
SIP keep alive packet when LP389/LP600 is seating behind NAT. 2.
Support
direct dial from expansion panel when pressed a
expansion key. The hand-free speaker/mic will be
used. (LP600O only) 3.
Support
use calling number length to distinct the on-net and off-net calling. 4.
When
hand-free is used and handset is lifted, turn off the hand-free and the voice
will be send to handset instead of disconnecting the call. 5.
Add
the support to play local or remote ring tone when receive a 183 with SDP and
then a 180 without SDP. The "180 W/O SDP After RTP:Play ring back tone/ Play remote voice" from
web page is used for settings. 6.
Support
to play ROH tone after busy tone is played. 7.
Support
DTMF relay before call connected (early media stage) |
|||||
|
Configuration
Item Changed |
|||||
|
|
|||||
|
Hyper
Link |
|||||
|
WELLTECH WEB
Site: http://www.welltech.com/support/LP600o_V1.htm http://www.welltech.com/support/LP389_V1.htm User Manual: Firmware
Download: LP600N: http://www.welltech.com/support/voip2/SIP%20series/LP600/v107a/lp600n.107a.zip LP600O: http://www.welltech.com/support/voip2/SIP%20series/LP600/v107a/lp600o.107a.zip LP389: http://www.welltech.com/support/voip2/SIP%20series/LP600/v107a/lp600m.389.107a.zip |
|||||
|
Note |
|||||
|
|
|||||