WellSIP 6500 V2.03.2 Release Note
****************************************************************
Version Name: 2.03.2
Release Date: Dec.19th 2005


Bugs Fixed: 
        - Fixed call validation checking caused random disconnected problem.






****************************************************************
WellSIP 6500 V2.03.1 Release Note
Version Name: 2.03.1
Release Date: Aug.15th 2005


Bugs Fixed: 
        - Fixed the SNMP ineffective
	- Fixed the SMTP Server for more than 20 characters
	- Wrong forward call in the subscriber monitor
	- When the subscriber login and change setting, service might be trun off randomly

  
Features: 
	- Call Return support
	- Keep subscriber monitor and subscriber ID by using copy and paste
	- Allow expires to be smaller than 60 sec for some NAT box




****************************************************************
WellSIP 6500 V2.02.3 Release Note

Version Name: 2.02.3
Release Date: Jun.17th 2005


Bugs Fixed: 
        - T.38 fax transmission failure beacuse wrong timer expired.
	- Fixed 401 Authentication can not to pass through some NAT box.
	- Monitor some subscriber casued system reset
  
Features: 
	- New recorder device type and subscriber setting for lawful interception
	- Hitless high available redundant (license required)
	- HA virutal IP support



****************************************************************
WellSIP 6500 V2.02.2 Release Note
Version Name: 2.02.2
Release Date: May.12th 2005


Bugs Fixed: 
	 - Data modification error or unsynchronized when use batch config to insert or update  large data
	 - Prefix hunting failed for parallel answer hunting method
	 - Incorrect call validation message to check call disconnect or not
	 - Cannot added subscriber more than 10 digits by using batch configuration
 	 - forward URI for short code
 
  
Features: 
 	- Add prefix hunting (load balance/run robin) selected for gateway when call can be reached and failed
 	- New load balance hunting method for gateway. Hunting will stop when gateway is reached
 	- Digit Manipulation match target for ANI
	- Silence RTP detection for call disconnect
 	- Pickup Group per subscriber 
 	- Device Type Authentication (Device ACL) 
 	- Caller info selection for UAC
 	- Find me hunting first or not
 	- Use telephone keypad to setup selected telephony service
 	- Synchronize user and web login password. when user change web login password, user password will be synchronized.



****************************************************************
WellSIP 6500 V2.01 Release Note
Version Name: 2.01
Release Date: Mar.11th 2005


Bugs Fixed: 
	- Network2 configuration failure by LCD panel after reboot
	- Incorrect UAC registered status
	- Stop perfix hunting for gateway when call can be reached and failed
	- On the fly change is added for a subscriber change to gateway 
	- Incorrect Call/RTP statistics report
	- When using batch configuration, password will be alerted (same as telno) for the existing subscribers.
	- System time synchronize failure
	
Features: 
	- Add display name as subscriber id in SIP from header when call forward caller mode is "forwarder".
	- ANI replacement per subscriber